Simpl Swiss implants are the best solution to dental problems

578

The Swiss company U-impl, founded in 1996, has made a huge contribution to modern implantology.

Its technologies and products have made the growing field of dentistry safe, precise, technologically advanced and reliable.

In 2010, the brand created a competitive series of Simpl Swiss implants. Successful development allows the product to be used in any clinical cases.

Roott Dental Implants

ROOTT implants are a new product in the field of implantology - models appeared on the market only in 2013. The company focuses on the immediate loading protocol, developing implant models specifically for the possibility of immediate installation of dentures. At the same time, both the implant system and the only clinic in Moscow are actively promoting under this brand. The manufacturer claims the unique properties of implants, which have made it possible to advance in the field of immediate-load implantation. But is it? In this article we will look at the main characteristics of implants and their advantages.

Types of ROOTT implants

• Roott Form: classic implants designed for classic two-stage implantation, used when there is sufficient bone tissue,
• Roott Compressive: a line of thin, one-piece implants designed for medium-volume, narrow bone. They are used for restoration of a small number of lost teeth, including immediately after their removal. They are installed minimally invasively, subjecting the patient’s own bone to compression,
• Roott Basal: basal implants that have an active thread in the lowest part of the structure. Designed mainly for restoration of the entire jaw and immediate loading with dentures. They also have a one-piece design.

About the history of the brand

ROOTT implants were developed by specialists in the field of implantology who specialized in immediate loading treatment protocols and were followers of Dr. Stefan Ide. It was Dr. Ide who first introduced to the world implants, the fixation of which was carried out in the basal and cortical parts of the jaw bone tissue, which made it possible to do without bone grafting even in the presence of atrophic processes.

On the basis of the Swiss company TRATE AG, including with the participation of the doctor’s followers, implant models were developed that are almost a complete copy of previously existing implant models for immediate loading (the development belongs to the Ihde Dental company and its Oneway Biomed brand, which has been on the market for more than 40 years). years). On the one hand, implants are distinguished by fairly high quality and performance characteristics, on the other hand, they have a fairly high price compared to prototypes. And since they are used relatively recently, this does not yet allow us to evaluate their real, rather than declared, service life in practice.

Today, ROOTT implants are installed in the only medical center in Moscow, which has a franchise for their use in the Russian Federation. This obliges the patient to be observed by doctors only from this clinic, and if there are problems with the system, it will be impossible to reinstall under warranty or replace the superstructures in another center due to the lack of doctors working specifically with the system of this brand (but not the treatment protocol as a whole).

Features of ROOTT dental implants

• wide selection of models - there are more than 100 implants of different lengths and shapes for almost any clinical situation
• full compatibility: implants are created from pure medical titanium, which means they are not rejected by the body,
• various types of thread: makes it possible to install implants in a minimally invasive way, with minimal tissue damage and in deeper parts of the jawbone,
• microporous coating: ensures tight fusion of the implant and bone tissue,
• presence on the market is about 5 years, so there are no proven clinical studies demonstrating the quality of the products in the long term,
• instant loading with prostheses is possible,
• The guarantee for implants is 25 years.

Cost of dental implants ROOTT

ROOT implants belong to the middle price segment. The cost of their installation and prosthetics is slightly higher than the use of other brands of implants for immediate loading protocols. However, as a rule, the cost of their installation is fixed, that is, “turnkey” - it includes diagnostics, the implant itself, all the necessary procedures for its implantation, manufacturing, fixation and subsequent correction of the prosthesis to the patient’s bite.

Reviews from specialists and patients about implants

As mentioned earlier, the system is quite unpopular on the market, so among Russian specialists no one really knows it and has not practiced it on the ROOT implant system, except for the doctors of the clinic of the same name. On the Internet you can find a lot of advertising articles describing the advantages of the system, but, unfortunately, we were unable to find any information in Russian about clinical studies, expert opinions and long-term results, even from the moment the implants were launched on the market. There is also little information on the manufacturer's website. On the website of the RUT clinic there are many speeches by various implantologists from other countries, but again, they all talk only about the already stated positive characteristics.

As for patient reviews, they are mainly addressed to the RUT clinic of the same name. We were able to find several quite truthful, in our opinion, positive reviews, but there are also negative ones regarding multiple reinstallations of implants after treatment. It is fair to note that the reinstallation of implants may not be due to poor quality of the products, but most often rejections occur due to the fault of the doctor or due to insufficient control over the oral cavity by the patient himself. Therefore, it would be wrong to loudly declare that, based on these patient reviews, the RUT implant system is bad, and there is no data for such a conclusion, after all, patients complain about their sensations and inconveniences, and not about the features of the implants.

To summarize: the Roott implant system is quite new and its advantages compared to the original Ihde Dental developments are not yet clear. And although the latest generation of Rutt implants looks interesting and quite promising, due to the rarity of the system and the lack of transparent information, decisions in its direction should be made with caution. The closeness and monopolization of TRATE AG in Russia in only one clinic hinders the development of the declared innovations among Russian colleagues. For the patient, this means that they will also have to deal with only one clinic, which is fraught with certain risks associated with the quality of treatment, guarantee and level of service provided.

Advantages

Before conquering the Russian market of dental products, Swiss systems passed all stages of mandatory testing.

The determination of the quantitative and qualitative properties of the implants during the tests was successful, which allowed experts to highlight a number of advantages of the Simpl Swiss systems:

• Accelerated implant survival process . The technology for achieving special surface characteristics of the product has been patented. The porous relief “attracts” bone particles into the pores, which contributes to the rapid engraftment of the rod in the anatomical environment of living tissues.
• The ability of a titanium rod to interact with the body without causing adverse reactions.
  The ultra-strong non-toxic titanium alloy used in the manufacture of Simpl Swiss implants is distinguished by remarkable mechanical properties and impeccable biocompatibility.

  It has no toxic effects, completely fuses with the bone and can withstand high loads.

• Increased aesthetic possibilities . Some of the above design features improve the appearance of the model.

The product line consists of versions adapted for the production of individual zirconium dioxide systems. This plays an important role in prosthetics of the frontal group of dentition elements.

• Individual packaging method .
  Each titanium rod is packaged in a sterile container, which is opened only in the presence of the patient, which prevents the appearance of any types of microorganisms on the surface of the implant before its installation. Each unit of the model has its own individual digital or alphanumeric code, which fits into the medical record of the dental patient.
• Guaranteed lifetime service life . Issued by the holder of full property rights (manufacturer) subject to the correct implementation of the titanium rod into the jaw bone masses and careful adherence to the recommendations for caring for the system by the patient.

Features of the production of domestic Niko implants and the scope of their application.

This material is dedicated to Antozhir implants.

Here https://zubovv.ru/implantatsiya/proizvoditeli/izrailskie-adin-modeley.html you will find reviews about Israeli Adin implants.

Roott dental implants – Swiss quality at an affordable price

You can replace lost teeth in your mouth with Swiss Roott implants. We will describe their advantages, indicate prices and provide reviews from dentists and patients who have already tried this technology and products on themselves. After all, before agreeing to such an operation, you need to carefully weigh all the pros and cons of the proposed options.

The Open Dental Community has contributed to the development of new implants for restoring dentition. For this purpose, scientists have combined all the technologies and knowledge of previous generations and created unique designs that make it possible to benefit from implantation even for those patients who were previously refused due to existing contraindications.

Swiss implants are the best in the dental services market

Swiss implants have earned a reputation similar to watches and banks - convenience, durability, reliability.

It is in Switzerland that high technologies for prosthetic implants are developed, on which dental treatment is based in clinics in Russia, Europe, and America.

To create prosthetics that meet all the requirements of patients and dentists, specialists from Switzerland use the latest achievements of science and technology, taking into account the experience of competitors and their own.

Patients are offered to install Swiss-made implants for the following reasons:

• After installation, the chewing load is restored as soon as possible;
• the process of prosthetics on implants takes less time compared to analogues from other manufacturers;
• Ideal biocompatibility with bone tissue ensures excellent implantability and reduces the risk of complications;
• The unique thread on the implants ensures reliable fastening of the dentures to the gums;
• Systems from Switzerland are easy to care for.

Popular manufacturers

Swiss implants are widely used in dental clinics around the world, including Russian ones. Their arsenal includes both premium and more affordable prostheses.

Swiss implants Simpl Swiss

Simpl Swiss implants were developed by the Swiss company U-impl, which was founded in 1996. The Simpl Swiss dental implantology system has been successfully used since 2010.

It is among the top brands for the following reasons:

• The wide range of implants, gum formers, abutments and other related components and instruments allows us to perform any type of prosthetics, up to the creation of an “all-on-four” system.
• The system is designed for both two-stage implantation (with preliminary augmentation of missing bone tissue) and single-stage implantation, which allows reducing the time of osseointegration. At the same time, the quality of implantation of the prosthesis does not suffer.
• The implants are made of medical titanium, a chemically inactive material. This avoids inflammation and allergic reactions.
• The screws are shaped like a conical hexagon and are processed in such a way that the implant is quickly and securely integrated into the bone tissue. The bone-metal structure fully withstands the chewing load. It is as strong as natural teeth.

Straumann

The products of this company are among the four best implantation systems for dental prosthetics.

Straumann implants are available in three sizes for different clinical cases:

1. Standard – for performing a classic or one-step operation;
2. Standart Plus – implants for implantation into the interdental space, promoting rapid healing of soft tissues.
3. Tapered Effect is the optimal solution for immediate implantation or early prosthetics after tooth loss or extraction.

The difference between Straumann and other implantation systems is a number of features:

1. The porous structure ensures reliable fixation in the jaw bone tissue.
2. The cone-shaped shape ideally matches the anatomy of the root alveolus, thereby simplifying the procedure for implanting the implant into the jawbone.
3. Medical titanium, from which prosthetics are made, is perfectly compatible with body tissues.
4. The rough surface of SLA increases the hydrophilic properties of prostheses.
   Thanks to this, the engraftment process begins immediately after the implant is inserted. Prosthetics can begin as early as the fourth week after installation of the artificial root.
5. Structural rejection is kept to a minimum.
6. The method is suitable for those suffering from diabetes, hepatitis, and insufficient bone tissue (no augmentation required).
7. The implantation operation is low-traumatic.
   During this procedure, no incision is made in the gums, and the procedure itself lasts about 10 minutes.

The only drawback of the system is its high cost. Straumann implants are the most expensive brand of all. However, the manufacturer is so confident in the quality of its prostheses that it gives them a lifetime warranty if used adequately.

Ihde Dental AG

A distinctive feature of Ihde Dental AG, which has existed for more than half a century, is the complete lack of marketing promotion of dental structures on the dental services market. With excellent quality, the products are not advertised anywhere and are not sold freely to clinics.

Only those specialists who have completed a training course at the manufacturer’s site in Germany or Switzerland can install implants from Ihde Dental AG.

This shows that if a dental clinic offers clients systems from Ihde Dental AG, it does not skimp on the training of its specialists or on materials.

Ihde Dental AG offers at least 350 types of implants. Russian experts prefer Allfit series systems (KOS, BCS, BOI, Hexatone) for the following characteristics:

• The patented coating is resistant to food and chemical irritants. Therefore, implants from Ihde Dental AG are the best solution for smokers and people who neglect careful oral hygiene.
• The percentage of design rejection is low. There are practically no side effects.
• Implantation can be performed on the day of tooth extraction.
• Healing after surgery occurs as quickly as possible.
• Ihde Dental AG products have a more affordable price than Straumann systems.

SGS

Implants from the Swiss company SGS have recently appeared on the Russian market. However, in just a few years they have won many fans among both patients and dentists and have become one of the leaders in the dental industry.

The company produces screw and conical implants. The former are distinguished by excellent compatibility with tissues and excellent survival rate. The latter, completely replicating the structure of the tooth root, are used for any type of implantation.

The advantages of SGS implants include:

• Increased distance between turns on the artificial root. This strengthens the fixation of the structure.
• The implant survival rate is good, and rejection is low.
• Unique bioactive coating "Bonit".
• A wide range of designs, abutments (standard, angular), gum formers. You can choose very small dentures measuring 3–6 mm.
• Possibility of one-stage and two-stage implantation.

ROOTT

The ROOTT implantation system was developed by the Open Dental Community and is produced by the Swiss company Trade AG. It offers a variety of designs suitable for any clinical situation, from the need for a full denture to the installation of a single tooth.

Like all Swiss implants, ROOTT prostheses are reliable and durable. However, they have distinctive advantages over other systems:

• When installing an implant, the gum flap is not damaged, which eliminates the need for sutures and swelling. Thanks to this, the rehabilitation process is significantly reduced.
• The ROOTT system can be securely attached to even small amounts of bone tissue. This shortens the implant healing period, which usually lasts at least six months.
• The implant and abutment are a one-piece structure, which contributes to a longer service life.
• Materials that are biologically compatible with bone tissue reduce the likelihood of allergic reactions, rejection, and inflammatory processes.
• Affordable cost compared to other systems.

Nobel Biocare

Nobel Biocare implants, a joint Swiss-American production, are among the most popular in the world. According to statistics, 40% of dentists offer to install just such a system for their clients. This indicates both the highest quality of the product and its availability.

Positive design characteristics include:

• Special unique TiUnite coating that improves biocompatibility. In addition, it absorbs blood protein, increases platelet activity and promotes the accumulation of fibrins, which is the key to the rapid engraftment of artificial roots.
• The bone bed is subject to minimal trauma during installation, so the implant can be placed immediately after tooth extraction.
• Nobel Biocare implants cannot be counterfeited, since each product is assigned an individual number. This ensures the patient that the dentures will serve him for many years.

Dental implantation is not a cheap service. Swiss systems occupy a niche of expensive designs. The high cost is justified by excellent quality, long service life and the manufacturer’s responsibility for their products.

• Colgate 32%, 1816618166 32%18166 – 32% of all
• Splat 24%, 1358513585 24%13585 – 24% of all
• ROCS 16%, 91149114 16%9114 – 16% of all
• Sensodyne 11%, 6292 votes6292 votes 11%6292 votes – 11% of all
• New pearls 10%, 59265926 10%5926 – 10% of all
• President 6%, 34293429 6%3429 – 6% of all

Source: https://CreateSmile.ru/shvejcarskie-implanty/

Peculiarities

This organization has existed since 2000 and is developing implants. She works closely with the Swiss company Trate AG, which produces various dental structures. Their products are top models and are considered one of the best. Today in Russia, most dentists also want to work with this manufacturer, as it successfully combines high quality and affordable cost.

The very philosophy of the company implies the use of such technologies and developments that help to implement implantation for all categories of patients. To this end, they focused their efforts on basal techniques in order to minimize the risks of implant rejection and reduce the list of contraindications for the procedure.

Also, all developments are aimed at restoring the dentition of people with bone tissue atrophy, since it occurs quite quickly after tooth extraction or loss. Without the usual physiological load, the alveolar processes rapidly decrease and, in order to carry out implantation, it is necessary to build up bone tissue. With Roott implants this can be done easily, without unnecessary procedures.

Kinds

The range of implants is based on three main types:

• Inter – suitable for both standard two-stage implantation procedures, when bone tissue grafting is required, and for one-stage implantation. The main advantage is the versatility of the design and its wide range of applications.
• Maxi – is used primarily for replacing chewing teeth against the background of severe fragmented atrophy of the mandibular bone tissue. The advantage is increased strength of the product and enhanced fastening of the model;
• Mono Mini – the scope is somewhat limited. The system is adapted only for a one-step procedure. An undeniable advantage is the possibility of its implantation in the presence of limited bone spatial mass.

Check out the rating of the best dental implants and their manufacturers.

This material is dedicated to Biotech implants.

Here https://www.vash-dentist.ru/implantatsiya/proizvoditeli/semados-obzor-produktsii.html reviews about Semados implants are offered.

Advantages and disadvantages

When it comes to the classic Roott Form rod, all the characteristics and features of conventional implantation using any other system apply to it. Such products are a good replacement for one or two teeth in a row and help to preserve a beautiful smile as effectively as possible while restoring units in an open area.

But most often, dentists are faced with the need to use other structures for basal implantation, for which they were developed. Single-phase implants have the following advantages that distinguish them from the entire variety of modern dental products:

• The reliability and survival rate of the rod reaches 98% in the lower jaw and 95% in the upper jaw. This is due to the fact that in the second option the bone tissue has its own characteristics and has a reduced density.
• Low risks of side effects and the appearance of peri-implantitis - inflammation of the soft tissues around the installed implant occurs mainly due to the accumulation of bacteria at the neck of the structure. When using Roott products for basal implantation, this problem is eliminated on its own, since the long neck significantly increases the distance between the gum edge and the working surface. Therefore, even among smokers, the risks of inflammation and rejection are noticeably reduced.
• There is no need to perform bone grafting, that is, to increase the alveolar ridge for those patients who have already begun to atrophy. Thanks to a special technique for implanting the structure, it is possible to fix the implant immediately in the hard tissues of the jaw, regardless of the condition of its shallow layers.
• Thanks to express implantation, the recovery and waiting period for the patient is significantly reduced. In almost one procedure, a full-fledged tooth is implanted, on which the usual functional load is immediately allowed.
• Such implants can be used even in cases where classical implantation is contraindicated due to illness. They are used for diabetes, osteoporosis, pathology of periodontal tissue, and even in old age.
• The traumatic nature of the procedure is also minimized, since the volume of the open wound is significantly reduced due to the thin incision. Therefore, the recovery and healing period is reduced.
• Even with complete absence of teeth, with Roott implants you can replace the entire lost jaw and restore a full, beautiful smile. For this purpose, implants are used as supports for volumetric bridge structures.

Types of GHS products

The official website of SGS Dental System presents 4 series of dental implants, plus components:

• Straight and angled abutments with an innovative type of fastening that combines the properties of spherical products and locators for conditionally removable and removable systems.
• Adapters for crowns that need to be installed at an angle.
• Temporary abutments made of durable polymer materials.
• Gum formers.
• Surgical and orthopedic instruments.

Screw P1 (Pr) BONITex premium

The screw-shaped rod is indicated for implantation into dense jawbone, but can be installed in all types of bone under favorable conditions. Reliable fixation even in the most difficult cases is ensured by double threads. The surface of the implant is covered with Bonit, which is biocompatible with jaw tissue. This series of implants is not recommended for immediate loading .

4 series of dental implants SGS Dental System

Conical P7 (Pr) BONITex premium

It has increased performance properties thanks to the sharp double cone-shaped thread. Due to the self-screwing condensing type design, implantation is easier and less traumatic. The unique shape allows you to change the direction of insertion during installation. The surface is treated with microcrystalline “Bonit”, which improves engraftment.

Can be implanted into very rarefied bone, but it is not recommended to install into bone types 3-4.

Integral P7S

The implant is conical in shape and is indicated for immediate loading when there is sufficient bone volume. It has a fused structure that provides high strength. The tight fit to the gum eliminates the risk of bacteria entering the system.

It can be installed in any type of bone, however, when implanted into soft jaw bone, the risk of rejection increases.

Integral P9S (slim)

The series is intended for implantation using a one-stage method in conditions of a narrow alveolar ridge and small interdental space. The P9S integral implant is recommended for fixation in hard bone; it cannot be implanted in patients with soft jawbone. The optimal system for installing an artificial root with immediate loading .

when is it used?

PROCESS AND TECHNOLOGY

The doctor selects the implant and its installation protocol for each individual case. Due to the possibility of combining protocols in one implantation system, the list of contraindications is reduced and almost any clinical case is effectively resolved. .

Depending on the clinical case and indications, implants can be installed simultaneously into the socket of an extracted tooth or by puncture, or with peeling of the gums to prepare the implant bed. Nevertheless, according to the logic of selecting solutions, in 85% of cases, implants are installed in a low-traumatic manner without incisions and sutures, as well as replanting of bone material. .

During implantation with immediate loading, a lightweight FIXED metal-plastic prosthesis is installed in order to quickly restore chewing function and correct bite during use. In the case of two-stage classical implantation, a permanent prosthesis is installed 4-6 months after the installation of the implants. .

The price of Swiss reliability

The cost of the implant includes : initial examination, anesthesia, implant and surgery to install it.

Our business-class dentistry “Aesculapius” cooperates directly with manufacturers, without resorting to intermediaries. Therefore, all services are kept at a price that is affordable for most clients. In addition, we pursue a competent pricing policy and strive to make high quality accessible to all residents of Moscow and the region. Thus, the cost of installing a turnkey Swiss implant will be beneficial to all patients, regardless of their level of material income.

We offer clients the first price in Moscow for implantation and other services. All procedures are carried out using ultra-modern equipment, and materials are purchased from suppliers from Switzerland and other leading countries of the world. Experienced doctors at the clinic provide examinations and treatment at a very low cost, which is why dentistry is very popular in the capital.

In particular, we carry out all additional procedures, such as sinus lifting and bone grafting, which saves patients from the need to look for other centers, waste money, effort and time.

benefits of root implantation

• Implantation can be performed immediately after tooth extraction;
• The implant and abutment are a single design that allows you to install permanent prostheses on the 3rd day after implantation;
• In case of bone tissue atrophy, its augmentation is not required; there is no need to wait 6-12 months for the engraftment of bone material.

painlessness

• Implants are installed using a minimally invasive method, without injuring the upper gum flap, which allows maintaining a high degree of sterility and also shortening the rehabilitation period;
• Even if a large number of teeth are missing, implants are installed in one visit;

reliability

• The implants are made of biologically compatible materials and clinically tested, which eliminates their rejection;
• The world's first system that works with all parts of the bone tissue to stabilize implants;
• The shape, thread, coating and installation methods of products made it possible to speed up the engraftment process by 1.5-2 times;

efficiency

• Return of aesthetics and chewing function almost immediately after implantation;
• Engraftment of the implant occurs in parallel with the use of the new artificial tooth;
• Combinations of implants are created individually for each clinical case;

Where is the best place to install the best Swiss Straumann dental implants?

Despite all the advantages of the materials and design of the best Straumann dental implants in the world, it is important to follow the implant installation technology in order to achieve maximum survival rate and the longest period of their use.

The network of dental clinics "Elident" offers you its services. We do everything possible to ensure that you are satisfied with the result of your treatment. The use of Strauman implants is quite common in our clinics. In doing so, we are guided by the following rules:

1. We pre-train our implantologists and orthopedists in the technology of installing implants and subsequent prosthetics on these dental implants using Straumann technology directly at the manufacturer’s training centers;
2. During the implantation process, we use only high-quality instruments developed by Straumann for implantation;
3. We offer the services of only experienced, professional implantologists. Our specialists regularly undergo advanced training courses;
4. We comply with all sanitary standards. In our work we use proven antiseptic agents and solutions;
5. Our price for implants is the best in Moscow;
6. We try to properly organize the treatment process, ensuring proper coordination between surgeons and orthopedists, competently forming a plan of treatment procedures;
7. We first study information about the patients’ health, on the basis of which we use one or another type of implants and types of dentures;
8. We provide an individual approach and friendly attitude towards each patient;
9. We provide a full guarantee for all work and materials carried out;

And so, we are ready to offer you the best dental implants and the best price for these implants! We advise you that if you have any more questions about which implants are best to place and where the best price for Straumann dental implants is offered, then use an Internet search and you will be convinced that we need to meet at an initial consultation.

Patient satisfaction level

Today, one-stage implantation with instant loading is the pinnacle of evolution in dental restoration. According to the results of a survey by the Open Society of Dentistry in 2012, 87.5% of patients (out of 245) who had other orthopedic structures before immediate implantation indicated the highest rating on the satisfaction scale.

• the bone does not need to be increased in size even with severe atrophy, saving money and reducing treatment time;
• maneuverability for installing implants - more opportunities to solve the problem;
• new teeth – in just a week, a good level of aesthetics and chewing function return immediately,
• practically no pain and discomfort after installation of implants, quick rehabilitation process.

Basal implantation with immediate loading appeared almost simultaneously with the development of the classical approach - it originates at the end of the last century in Europe. However, it was the inventors of classical implants who achieved commercial success - manufacturers immediately picked up the idea and began to develop it, offering patients and dentists hundreds of different implant options for classical implantation.

However, patients increasingly began to complain about too long treatment periods, very complex and difficult operations for the body, and long recovery after them. Long-term preparation, delayed loading and receiving prostheses only a few months after the start of treatment gradually pushed two-stage implantation into the background - and implantation with immediate loading took the leading position. The use of a variety of implants and the variability of their installation (even at an angle) makes it possible to restore the patient’s teeth even in the most advanced cases and in a short time with the least trauma and in highly sterile conditions.

Two-stage or classic dental implantation involves screwing the implant into the bone, then allowing it to heal for several months, and then fixing the prosthesis. But the classic is possible only under one condition - there will be enough bone tissue to implant fairly massive implants.

FLAWS:

• long treatment period: from the start of treatment to the installation of prostheses, at least six months pass, and on average - a year or even a year and a half. This time is required for complete engraftment, that is, the fusion of bone tissue with the installed implant,
• long-term rehabilitation: the tissues are quite injured, so they heal after surgery for at least a couple of weeks,
• with bone atrophy, an increase in its volume is required: this means additional material costs, an increase in the duration and complexity of treatment.

Clinic guarantees

With complex implantation on a turnkey basis, the patient is provided with the following guarantees:

• For the ROOTT implant system - unlimited .
• The work of an implantologist (for complex implantation) is unlimited .
• For a conditionally removable orthopedic structure made of ceramic composite – 5 years .
• For the frame of the prosthetic structure - 10 years .

Warranty obligations are fixed in the contract and are valid subject to compliance with the prescribed conditions. To maintain the clinic’s guarantee, the patient must:

• undergo regular medical examinations and diagnostics;
• follow the recommendations regarding oral hygiene prescribed in the service book issued to the patient;
• Visit the clinic annually for professional oral hygiene.

During the year after implantation, monthly free examinations by a doctor are provided to monitor the dynamics of implant healing.

If medical recommendations are ignored, the patient does not attend scheduled examinations or decides to continue treatment in another dental clinic, the guarantee is void.

Sign up for a consultation

three ROOTT specialists + diagnostics as a gift

All specialists Our specialists

Tatyana Anatolyevna Argunova (Sivova)

dentist-therapist

0:45

Dorokhov Konstantin Vladimirovich

dentist - orthopedist and specialist in the field of dental prosthetics

About the manufacturer

Swiss designs have their origins in France. They were first created in his homeland by the dentist Scorchetti. This scientist began to conduct his experiments, during which he involved both the cortical and spongy layers, which no one had done before. The experiment had a positive effect, after which the design began to gain popularity.

Swiss specialists, when studying the production method, approved and appreciated all the advantages, after which they began mass production of dental products. After this, intraosseous screw samples were created, differing from each other in shape, coating, types and sizes. Implants are used very widely around the world, but in Russia they became popular only a few years ago.

Why do more and more people trust the best dental implants from Straumann?

Over the several decades of its existence, the brand’s products have been appreciated by thousands of patients. Today, Straumann has more than 9,000,000 successfully installed dental implants! Think about it, 9 million dental implants have been installed. This is indeed a result that indicates the popularity of Straumann dental implants in the world. A huge number of patients, when discussing the question of which implants are best to place, chose the best Straumann dental implants.

The main secret of the company's success is the use of high-quality nanomaterials and constant improvement of the technological process for manufacturing dental implants. Thanks to the regular introduction of new dental implants, the manufacturer has managed to increase the effectiveness of treatment and significantly improve the survival rate of implants.

Who are they contraindicated for?

The procedure for artificial dental implantation has a number of contraindications for implantation in patients with the following problems:

1. chronic types of diseases, including diabetes of any stage, tuberculosis and other diseases that require regular medication to maintain a certain quality of life;
2. diseases of the hematopoietic system and heart;
3. acquired or anatomical ability to restore the optimal level of bone tissue;
4. malignant and benign nature of the origin of oncology;
5. disturbances in the functioning of the central nervous system;
6. mental disorders and diagnoses associated with this pathology.

Compressive

The design was created for patients who have large bone pathologies, especially if its volume is too small. This is an excellent way to restore dentition where many elements are missing. Fixation is possible immediately after tooth extraction, making this method less traumatic. Such elements are relevant for simultaneous implantation.

In this design, the abutment and implant are a single model, when complete installation is possible in just a few days. Products are implanted into the deepest areas of bone tissue, into the basal or cortical layer.

Such products guarantee high-quality fixation of the artificial root, which minimizes the risk of atrophy of artificial (if any) and natural bone tissue.

Swiss Roott implants are prominent representatives of basal designs from this manufacturer. The mold has an active thread on the top, which during installation comes into contact with the deepest layers of the jaw bone. Thus, the manufacturer provides a guarantee of successful and long-term operation, because the bicortical bone layer does not undergo aging, which indicates strong retention regardless of the patient’s age.

The main purpose of such structures is the complete restoration of the jaw. It is solid, due to which instant loading is provided immediately after implantation. The installation method is transgingival and does not require additional expansion of artificial hard tissue.

Products from this family are used only for the classic version of implantation. They are usually implanted into a normal volume of bone tissue, provided that the tissue regeneration process is normal and functions without failure.

Implants are implanted into the spongy part of the bone, which requires surgery where an incision is made into the gum tissue.

These structures are used when it is necessary to achieve high aesthetics, or for small jaw defects.

The main condition for implantation is that there should be no healthy human teeth nearby or their complete absence.

Advantages of ceramic composite

Keromer is a light-curing material that combines the qualities of composite and ceramic materials. Unlike ceramics, it is easier to work with and does not require baking - you can correct the bite or repair the crown without removing the prosthesis. Superior to composite in quality.

Advantages of the material:

• abrasiveness and abrasion characteristics similar to those of natural tooth enamel;
• low level of wear;
• resistance to plaque formation;
• natural transparency;
• high strength;
• color stability throughout the service life;
• cannot be colored with food dyes;
• simple restoration repairs;
• no polymerization shrinkage;
• maximum aesthetics;
• fast production;
• good functional result of orthopedic treatment.

A relative disadvantage of keromer is adaptive abrasion under high mechanical loads. But this quality allows you to preserve the enamel (natural or artificial) of antagonist teeth. If oral hygiene is ignored, plaque quickly accumulates around the crown.

Cons of Swiss implants

There are many disadvantages and risks when implantation is technically impossible. These include:

• models are designed for complete or partial edentia;
• with a high level of atrophy, it is not possible to obtain a correct and truly aesthetic contour, which means it is used for multi-level bone changes;
• Implantation is possible only in those cities where the company has a representative office, because specialists can undergo advanced training there to gain experience in implanting such products.

Design features of Simpl Swiss

Simple Swiss implants have unique design features. These include:

1. The presence in the design of an alloy of medical titanium, which is a chemically inactive element. Thanks to this, the risks of an allergic reaction and tissue inflammation are minimized.
2. The screw part of the Simpl Swiss implant is represented by conical hexagons, which undergo special processing, which facilitates easy and at the same time reliable implantation.
3. The metal frame is very durable, so it can withstand high chewing loads.
4. The product is equipped with special grooves located along the apical zone. When implanted, they are filled with fragments of the natural bone structure, which enhances primary fixation.
5. There is a micro-thread on the neck of the product, which helps to maximize the preservation of the volume of bone fragments in the areas of the mucous membrane that surrounds the shell, minimizing the pressure force in this area. For this reason, the gums and the upper segment of bone tissue do not lose their aesthetics.
6. The platform has a smooth finish, which increases resistance and resistance to harmful bacteria.
7. The abutment and implant are connected with a special fastener, which eliminates microchips and cracks, and also prevents food debris from penetrating inside and causing inflammation.
8. The product has a conical shape, so it can be used even on soft bone tissue, providing high primary stability.
9. The platform area is equipped with an edge ledge, which contributes to a very strong fit of the product.
10. A rough surface due to abrasive processing and acid etching that easily adheres to bone tissue.
11. Abutments in most cases have a gold finish and a low connection profile, which enhances the natural appearance after the crown is placed.

Price range

The price of root implants varies depending on the type of model:

1. single-phase implants cost patients from 40 thousand rubles, taking into account the cost of a plastic prosthesis, screw and installation procedure;
2. with complete edentia, implantation is carried out according to the all-on-6 and all-on-4 protocols and the price for installing all structures will range from 390 to 520 thousand rubles, taking into account all orthodontic services, root parts, temporary dentures made of acrylic and the cost of the products themselves;
3. fastening of Roott-Form type models - implantation of one structure costs 27 thousand rubles, plus metal ceramics, the cost of which is 18 thousand.