Veneers on front teeth before and after photos

Is it possible to install veneers without preparation?

Fixing dental onlays without preliminary grinding is possible, but only with minor tooth defects.
To avoid grinding down teeth, lumineers are most often used - ultra-thin microprostheses. They are more expensive than ordinary veneers, but they protect teeth even more reliably than native enamel. If your teeth are significantly crooked or uneven, it is not recommended to use lumineers. We invite you to familiarize yourself with Dental Surgical Office Equipment

You can also install veneers without grinding on small teeth with noticeable gaps. In this case, the procedure will achieve a good cosmetic effect.

What are veneers?

Veneers are thin (no more than 0.5 mm) petal-shaped dental coverings. They are designed to cover the outer surface of teeth. Most often they are installed on the front teeth and those falling within the smile zone. The use of such dental onlays allows you to hide many defects:

• change in enamel color;
• gaps between teeth;
• cracks;
• chips;
• abrasion;
• curvature of individual teeth and the entire dentition.

Installing veneers provides an excellent cosmetic effect: teeth are straightened and the enamel acquires a healthy light shade.

How to care for veneers?

Veneers require careful and thorough care, although everything is not as complicated as it might seem at first glance. For any person who respects hygiene, caring for the pads will not be a problem. And following simple rules will maximize the service life of microprostheses.

• Brushing your teeth with high-quality toothpastes twice a day is the first and most important condition for maintaining healthy teeth under veneers. It is unacceptable to use brushes with hard bristles or cleaning compounds with abrasive particles.
• Periodically, you should have your teeth professionally cleaned at your dentist's office. This will allow you to clean hard-to-reach areas, which is not always possible at home.
• Gnawing on hard foods (carrots, candies, goats, nuts, etc.) should be done as little as possible, or it is better to refrain from doing so altogether.
• It is advisable to quit smoking. Tobacco has a negative effect on the color of tooth enamel, so even the best quality plaques can become darkened by cigarettes over time.
• Take care of the veneers and avoid hitting the area where they are fixed. When engaging in active sports, it is necessary to use protective structures for the jaw.
• Monitor the health of your gums. This is especially true for areas with which microprostheses come into contact. Due to tight contact, the gums may swell and bleed. You must not allow the inflammatory process to begin, otherwise you will have to start the smile restoration all over again.
• If irregularities and gaps appear in the areas where the microprosthesis is attached to the tooth, you should immediately visit the dentist to avoid the development of caries and inflammation.

Installing veneers is a quick and easy way to get a straight, dazzling smile without any effort.

It is only important to choose the right material and, of course, contact only reliable, proven clinics. And to maintain long-term results, you need to follow a few simple rules and carefully monitor the condition of your teeth and gums.

How is veneers installed on teeth?

Photo session and diagnostic impressions

A photo session is carried out with a macro lens to visually analyze the patient’s smile in real time. The desired color of future veneers is selected and impressions are taken of the teeth for which veneers will be made.

Making a wax model

In dental laboratories in Berlin, Los Angeles or Moscow, a technician uses wax to model the future shape of new teeth, based on the wishes of the doctor and the patient.

Trying on a wax model to visualize the future result

With the help of special keys and plastic, the future shape of the new teeth is transferred to unaffected teeth and the patient can already see the future result at this stage.

Taking final impressions

No teeth grinding required! Only slight grinding is done within the enamel in the places required for this, and impressions are taken for permanent work. While the veneers are being made, the patient wears temporary plastic veneers.

Trying on and fixing permanent veneers

Already made veneers are tried on the patient’s teeth using a special gel. A photo session is conducted to analyze the smile together with the patient. Next, fixation is performed, after which the tooth and veneer become one.

Installing veneers is a painless procedure and there is no need to be afraid of it. It does not involve drilling teeth, which is so scary for many people. First, you need to go to the clinic and undergo an examination in a specialist’s office. The doctor will examine you and tell you whether installing veneers will help solve your specific problem.

If the examination does not reveal any problems with the condition of the teeth and oral cavity, the next step will be to draw up a treatment plan and select microprostheses that will be used in aesthetic restoration. Installing veneers is an expensive procedure, and therefore it is very important that the treatment plan is detailed and the patient understands what the final price he will have to pay for aesthetic restoration and why.

Does the installation of veneers require grinding of teeth? In some cases, yes. This is necessary so that the veneers fit as tightly as possible to the teeth and look natural on the dental surfaces. But if modern glass-ceramic veneers are used or those manufactured using high-tech equipment, the installation of veneers can be carried out without preliminary grinding of the teeth.

USEFUL TO KNOW: Grinding teeth is a procedure that cannot be called useful. Teeth with worn down enamel become vulnerable to external factors, carious bacteria and other pathogenic microorganisms. In addition, if the installation of veneers was carried out with the grinding of teeth, you will never be able to remove the veneers and start walking with your natural teeth. Therefore, when deciding to resort to aesthetic dental restoration with veneers, it is optimal to choose the type of onlays whose installation does not require grinding down the enamel!

After examination and diagnosis, as well as taking impressions of dental surfaces, all information is transferred to the dental laboratory, where, based on the available data, veneers are produced in the required quantity. The installation of veneers is rarely done on all teeth in the oral cavity: most often, veneers are made only for those dental units that fall in the smile area and are therefore clearly visible to others when communicating.

When the microprostheses are ready, the final stage of aesthetic restoration begins, that is, the installation of veneers. But before attaching the plates to your teeth with a permanent fixing compound, the doctor will definitely try on the finished veneers. This is necessary in order to make sure that the microprostheses are made with high quality and will not cause any discomfort to the patient during use.

Installing veneers involves gluing onlays to dental surfaces using special dental cement, the shade of which is selected so that the composition does not show through thin plates of ceramic or zirconium.

How long do your teeth hurt after installing veneers? Doctors hear this question from patients quite often, and the answer to it is: if the installation of veneers was carried out efficiently, on healthy teeth, then no pain after the procedure should bother you at all!

In order for you to fully understand how the installation of veneers takes place, we are posting a video in the article containing all the main stages of the process.

Installation of veneers: does it require special preparation?

Before installing veneers, your teeth definitely need to be properly prepared. A mandatory procedure will be professional sanitation of the oral cavity, which allows you to efficiently clean the dental surfaces of all types of plaque. In some cases, it is necessary to carry out preliminary dental treatment for caries, because veneers are always installed on healthy teeth!

Advantages and disadvantages

Microprosthetics has become a wonderful remedy for many. However, every remedy has a downside.

The advantages of installing veneers include:

1. Possibility to improve the appearance of teeth.
2. The ability of the material to withstand large temperature differences and high mechanical loads.
3. The linings are subject to restoration in case of damage or chipping.
4. Quick correction of an overbite or malocclusion.
5. Elimination of cracks and other damage to enamel.

Color is determined using the Vita scale. The marking is an alphanumeric index: from A to D and from 1 to 4. The letter indicates the shade, and the number indicates its intensity.

The disadvantages are the following:

1. If the instructions for use are not followed, porcelain onlays may become damaged and composite onlays may crack.
2. Before installation, preparation is carried out, due to which the original appearance of the tooth is completely lost.
3. The service life of composite veneers is 3–5 years, after which they require replacement. In addition, the material darkens over time.

Ceramic dentures, according to most dentists, are of higher quality.

Are there removable veneers?

If you ask any dentist whether there are removable veneers for the front teeth, he probably won’t even understand what we’re talking about. This is because in dentistry, a dental veneer is meant exclusively as a non-removable microprosthesis, which is firmly fixed to the natural tooth using a special composite material.

For dentists, this concept, in principle, does not exist; only removable dentures can be removed. But they differ in that they cover a large area of ​​mucous membranes, and artificial teeth are located on them only in those areas where there are no natural teeth. But even such a prosthesis can never be universal, one for everyone; it is made exclusively from casts of the patient’s jaws, but is not bought at a pharmacy and cannot be ordered from the USA by mail.

Those sites that offer to buy Perfect Smile removable veneers are fraudulent and have nothing to do with medical products. They should not be trusted, if only because in photographs of patients normal ceramic veneers are passed off as removable veneers Perfect. And the girl who advertises them in the video only talks about the advantages, without even demonstrating exactly how to use this design.

Thousands of patients who want to correct the shape, color of teeth or malocclusion have already bought into this deception. And, unfortunately, those who cannot find real reviews of the Perfect Smile Veneers removable veneers among custom ones still continue to buy. According to the manufacturer's idea, these onlays should be placed on natural teeth without any grinding or even a visit to the dentist. The consumer liked this idea, since everyone is afraid of visiting the dentist. But, if you think about such a proposal sensibly, already at this stage you can understand that this is a scam.

ATTENTION: Veneers cannot be placed on teeth without at least minimal grinding. They will not allow the jaws to close and will stick forward, protruding the upper lip

IN RARE CASES, only lumineers or composite veneers that do not overlap the cutting edge and have a minimum thickness can be placed without turning. Silicone removable veneers “for a Hollywood smile” definitely do not fall into this category.

Recovery period

There is no special rehabilitation period for installed veneers on the front teeth, so immediately after fixing the structures, you can return home to your normal lifestyle. However, in order for the products to last as long as possible, it is necessary to follow the doctor’s recommendations for oral care.

In most cases, a follow-up visit to the dentist is required so that the specialist can assess the condition of the gums and its reaction to the manufactured microprosthesis, and also check the position of the veneer on the front tooth surface and the reliability of the fixation.

Sometimes, after veneering vital teeth, hypersensitivity may occur, so a course of desensitizers will be required. In particularly difficult situations, to eliminate the increased response of teeth to thermal irritants, it is necessary to remove the pulp, and sometimes to cover the tooth with a metal-ceramic crown.

No special care is required for teeth covered with veneers:

• it is necessary to carry out daily oral hygiene using a brush and paste, which will allow the structure to maintain its shine and original appearance;
• it is advisable to limit foods that can leave pigmentation on the teeth, especially cigarettes, strong black tea, beets and blueberries;
• in order to avoid accidental chipping of part of the plate, increased chewing pressure on the front teeth should be avoided;
• Once every six months, visits to the dentist are required for a professional examination and possible correction of the product.

Veneers installed on the front teeth allow you to quickly correct aesthetic defects in your teeth and make your smile more attractive. To fix them, minimal grinding of the enamel is required, which is a less traumatic method of restoration than covering teeth with metal-ceramic crowns.

However, before veneering, you need to carefully study all the pros and cons of the procedure and consult a dentist about the possibility of installing such microprostheses.

Installation of veneers: price in Moscow

How much does it cost to install veneers on teeth in Moscow? The answer to this question will depend on what type of microprostheses you choose for aesthetic restoration, how many plates will need to be made and using what technology. We indicated approximate prices for veneers above, talking about the types of onlays used in aesthetic dentistry. Knowing the number of teeth that need to be restored, you can approximately calculate how much it will cost you to install veneers.

If you are interested in the exact price of a service, it is best to consult a doctor who will draw up a treatment plan and specify the specific amount of your future costs.

Installation of veneers is one of the services that our dental clinic in Moscow, Aesthetica, offers its patients. Reviews on our Instagram page can help you evaluate the quality of the veneers we install. If you need detailed professional advice and help in choosing the types of veneers, come and see our specialists at any time convenient for you!

Installing veneers is a great opportunity to become the owner of a magnificent, attractive smile and stop being shy to smile and communicate openly with people! We will be happy to help you acquire both a beautiful smile and self-confidence!

Indications

Microprosthetics in some cases is the best solution to the problem.

Dentists recommend installing veneers in the following cases:

1. For chips, cracks and uneven enamel.
2. Change in color that cannot be bleached.
3. Uneven row.
4. For crooked or underdeveloped teeth.
5. Pathological abrasion of enamel.

Russian technologies for manufacturing composites differ from Western ones. In European dental clinics, onlays are made in a special dental laboratory, and impressions are used after grinding and preparation. In Russia, dental plates are more like ordinary fillings. They are installed directly into the patient's mouth.

Removable veneer as a false tooth

True porcelain veneers, such as E-max veneers, require at least minimal grinding to ensure that the teeth do not protrude after installation. This requires a visit to the dentist. This is not just a false tooth, but a replacement of the outer layer of enamel. Perfect smile veneers have nothing to do with dentistry or medicine in general, and were not developed by doctors.

ATTENTION: Do not buy reviews of Perfect Smile veneers. The models in the commercials who show off their perfect white smiles actually have normal porcelain veneers.

This is a lie!

Smile removable veneers are made of polypropylene mass, similar to acrylic plastic. It softens in boiling water and hardens when dipped in cold water. Moreover, all the teeth and the part that imitates the gums are connected into a single block. This significantly distinguishes Perfect Smile veneers on teeth from real ceramic ones, which are made for each tooth separately and do not affect the gums in any way.

Considering that both the teeth and gums in removable veneers are made of the same material, there is no need to talk about the high aesthetics of this “product”. If you read a regular forum, and not fraudulent sites, you can find very funny reviews of Perfect Smile veneers, where buyers who trusted the advertising laugh at their reflection in the mirror.

The main qualities of Perfect Smile that cannot be ignored:

• Bright pink, almost red, gum color. Or rather, that part of the plastic that imitates gums. This color has nothing in common with the normal pale pink tint of the mucous membranes, which, moreover, is individual for all people. For this reason, Perfect Smile dental veneers look completely unnatural.
• Pushing forward. Even if your natural teeth are slightly deviated towards the palate, with the innovative Perfect Smile false jaws they will stand forward, moving the upper lip, as in the photo below.
• Inability to close the mouth. Having put Perfect Smile veneers on your teeth, you will be faced with the fact that you will not be able to completely close your teeth. And this is not surprising, because there will be a layer of plastic between the upper and lower natural teeth. You don't need to be a physics professor to understand this. After watching the video reviews, you can easily verify this property of removable veneers.
• Complete lack of diction. Well, what kind of diction can there be when the teeth do not close together, and there is a large foreign body in the oral cavity?!
• Drooling and a gag reflex are the body’s natural reaction to a foreign object, which everyone who tried to wear Perfect Smile dental veneers had to experience.
• Inability to chew. If there is no closure of the teeth, eating anything with the veneers on the teeth will not work. They will have to be removed before the feast.
• Lack of fixation. The dentist fixes a real veneer onto a tooth using a liquid photopolymer material and a lamp. In this case, a special fixation protocol is required, which includes several stages. Innovative Perfect Smile veneers are held in place only due to natural retention. And in most cases they don’t last at all, flying out of the mouth at the first attempt to speak or laugh.

Dental veneers perfect smile vaneers

For the first 10 minutes of wearing it, I felt somehow uncomfortable - my tongue was constantly swirling around the pad and I was even afraid to talk so that my “teeth” wouldn’t fall off. But then I got carried away by the conversation and even forgot that I had this overlay on my teeth - it stopped bothering me so much. I only removed the veneers when I went to bed. The first days I was afraid to eat in them - I thought they would fall out. How to properly put on Smile Perfect veneers But then I was convinced that they were holding firmly.

Before going to bed, I take out the pad and just wash it under running water. After a month of wearing it, there is no yellowing or any other damage. Milania Beautiful, but not their own Rating: But I came home, and when I was filming, I felt very sad, because my appearance changed dramatically. When I used it, I tried not to eat anything hard, I was afraid that the pad might fall off at the wrong moment.

The plate makes your teeth perfect: Before attaching the plate, you need to moisten it with water and press it to your teeth. This is enough to securely secure it to the teeth. The size is universal, so when ordering you don’t need to worry that it won’t fit. Can be worn for a long time. The cost is budget, but it is better to order from an official manufacturer so as not to run into a fake.

They are comfortable to wear and do not cause any discomfort. I get used to it within 20 minutes, and after that I don’t notice them. Turandot Solution to my dental problems Rating: My friends think that I got my teeth done. It can be used both on an ongoing basis and for isolated cases. There are no contraindications for long-term wearing.

Can be used by both women and men. The shape of the teeth becomes ideal, there is no darkening of the enamel. Veneers are easy to use. I first thoroughly brush my teeth, rinse the plate with water and fit it tightly to my teeth. This way they are fixed.

What are they?

Depending on the material being manufactured, veneers come in the following types:

1. Ceramic. Their production takes approximately 2 weeks. Special porcelain and zirconium dioxide are used to create onlays that have a natural color that is as close as possible to the shade of living teeth. At the same time, such linings are quite durable. The thickness of such products is 0.3-0.5 mm.
2. Composite. They can be placed on the teeth during a one-time visit to the doctor. They last less than ceramic ones, can darken and stain, and also require constant polishing. But they are cheaper, and their installation is carried out using a more gentle method without damaging tooth enamel.
3. Lumineers are the thinnest overlays (0.2), which are made using special porcelain and are called Hollywood. When installing them on teeth, there is no need to grind down the enamel. They are quite durable (20 years) and can even be attached to artificial crowns.

You should ask your dentist about which onlays are best to use. He will talk about the advantages and disadvantages of each type in relation to the patient's specific case.

What are Perfect Smile Veneers?

Innovative dental veneers Perfect Smile Veneers are special overlays that imitate the natural shape of teeth and are securely attached to their surface. The preferred method is to permanently install a series of Perfect Smile Veneers on the lower jaw or upper row. Modern production technology makes the pads removable. In dental clinics, veneers can be applied to teeth without the possibility of removing them.

At first, Perfect Smile Veneers seem unusual, like a foreign object in the mouth. Most patients no longer experience discomfort from the plates after 10 minutes, since they have a streamlined, natural shape and do not affect the bite. Externally, it is impossible to distinguish natural teeth from artificial plates. You can determine that veneers are installed on your teeth using special equipment or an examination of the oral cavity.

An important advantage of these veneers is that the Perfect Smile Veneers plate does not affect the integrity of the enamel and damage to the gums; installation is carried out at home

Special onlays - innovative dental veneers Perfect Smile Veneers

Real reviews of Perfect Smile veneers

Finding real reviews of Perfect Smile veneers in Russian on the Internet is extremely difficult. No matter what query you enter into a search engine on this topic, scam sites or purchased comments always pop up in the first positions. But if you search carefully, you can find funny Russian videos about Perfect Smile, where it becomes obvious that this is nothing more than a prank.

The instructions for Perfect Smile veneers promise that the overlays can be worn to important meetings, parties, and for photo shoots. But, given that they stick out from the mouth and fall out at the first opportunity, their use is almost impossible. Unless it will be a party and photos in honor of Halloween.

You shouldn’t trust fake comments that P erfect S mile veneers are suitable for everyone . They actually soften and partially repeat the shape of their natural teeth after hardening. But this does not make their appearance and fixation much better.

Veneers from E.max CAD –

Veneers from E.max CAD: before and after photos

Glass ceramics E.max CAD are lithium disilicate blocks designed for milling veneers and crowns on a computer-controlled machine (CAD/CAM technology) with virtually no human intervention. The process is as follows: first, the front surface of the teeth is ground down for veneers, after which a three-dimensional 3D impression is taken using an intraoral scanner.

Based on this impression, a computer program builds a 3D shape of future veneers, which is transferred to a computer-controlled milling machine. Next, future veneers are milled from E.max CAD ceramic blocks, after which there are still stages of firing, staining, glazing and fixing the veneers on the patient’s teeth (24stoma.ru).

Pros and cons of “E.max CAD” –

Yes, CAD/CAM technology is very modern, but it requires very expensive equipment, and this affects the cost of veneers. At the same time, the E.max CAD system has less capabilities for selecting shades of veneer color than E.max PRESS. Accordingly, the risk that the veneers will be slightly different from the neighboring teeth in shade and transparency will be higher.

The latter may be unimportant only if you use veneers to immediately replace all front teeth that fall within the smile line. But, if you need to make only 1-3 veneers only on problem teeth, then they may be noticeable against the background of neighboring teeth. In addition, the strength of veneers made from E.max CAD will be slightly lower - about 360 MPa, which is lower than the strength of veneers made from E.max PRESS of 400 MPa.

Well, the last thing that needs to be noted is that only standard veneers (0.6 mm thick and above) can be made from this material. For the production of so-called “thin veneers” with a thickness of 0.3-0.4 mm, which require minimal grinding of tooth tissue, or you can do without grinding the enamel at all - only E.max PRESS material is suitable. Thus, the latter turns out to be both stronger and cheaper, and has greater potential for creating ideal aesthetics.

Installation of composite veneers

Installing composite veneers is an opportunity to get a beautiful smile quickly and inexpensively. The doctor makes such veneers directly on the patient’s teeth, using ordinary filling material. Therefore, these microprostheses also have a second name - direct veneers.

The cost of installing veneers made of composite material seems attractive to many patients, because it is really quite low - from 5,000 rubles per unit. However, we do not advise you to choose this particular type of veneers, because at an affordable cost they have a large number of disadvantages.

Among the disadvantages of composite veneers:

• The aesthetic appearance of veneers made of composite material is quickly lost under the influence of external factors. If you take poor care of your oral cavity, and also smoke or often drink strong tea and coffee, the composite veneers will quickly darken;
• Composite veneers are not distinguished by their high strength. They may chip or crumble, and then you will have to go to the clinic again to install veneers, which means new expenses.

Composite veneers can be considered as a temporary option: when finances are not enough for more modern and expensive types of microprostheses. In addition, installing composite veneers requires high skill of the doctor, because not every specialist is able to create a beautiful and anatomically accurate tooth surface!

What types of veneers are there?

There are 2 types of microprostheses under consideration, the classification is based on the material of manufacture. Types of veneers:

• composite;
• ceramic.

On the eve of choosing the devices to be installed, the dentist must explain in detail what veneers, lumineers and ultraneers are, and name their differences. The last mentioned types of microprostheses are much more expensive than standard onlays. They are produced and attached using a similar technology, but their use does not require severe damage to natural tooth enamel.

Composite veneers

Such devices are made of organic resin with glass or ceramic microparticles. Direct veneers are formed from soft filling material by layering using adhesive systems. The doctor gives them their final appearance directly in the oral cavity, after grinding away a thin layer of enamel. It is advisable to install this option of veneers to improve 1-2 teeth in a row, because they will last only 3-5 years.

If you need more durable veneers for the front teeth, or the entire smile area needs correction, you should choose the laboratory method of producing composite plates. In such a situation, an impression is first taken from the jaw, from which the technician makes a model. Based on the obtained scheme, veneers are produced, they are polymerized in a special oven, which ensures long service life and strength of the plates. The prepared onlays are glued to pre-ground teeth using a flowable composite.

Ceramic veneers

The described type of device is made exclusively in the laboratory. To place ceramic dental veneers, you first need to file down your teeth. After this, an impression of the jaw is taken and sent to the technician’s workshop. Temporary veneers are installed on the prepared teeth while the patient wears them, and permanent microprostheses are formed in the laboratory. They are made in 3 ways:

1. Classical.
   Veneers are made by layering ceramic powder, which requires subsequent polymerization.
2. Pressing.
   The devices are cast under high pressure.
3. Milling.
   Microprostheses are machined from a single block of ceramic material.

The resulting veneers are painted with special paints, which ensures that their color matches the shade of adjacent teeth. Additionally, the dental technician recreates the unique features of natural enamel on ceramics. These are the most realistic veneers before and after photos show that these devices look very natural and at the same time provide a pronounced correction of the dentition. They are durable (service life is about 10-15 years) and strong, unlike composite microprostheses, they do not change their original color.

Hollywood laminates

American ultra-thin veneers without grinding of teeth are the most aesthetically pleasing, safe and durable. The technology for their production was patented by Cerinate under the Lumineers brand. The plates described are manufactured to order only in California. They look more natural than ceramic veneers because they are almost transparent.

Most famous musicians and Hollywood actors prefer Lumineers - without grinding the teeth, the natural enamel remains intact, such microprostheses can be replaced or removed without consequences. These linings are super durable and have a service life of over 20 years. The only caveat is that due to their transparency, lumineers are not recommended for use in the presence of multi-colored and spotted enamel.

An alternative to the type of overlays under consideration are ultraneers. They are a Russian analogue of Lumineers, made from modern ceramic material IPS E. MAX. Ultraneers are cheaper than Californian microprostheses and are created much faster, but their guaranteed service life is limited to 10-15 years, and in some cases, teeth must be ground down for installation.

Indications for installation

For these purposes, mini-filled composite masses are used. Their main differences are high aesthetic indicators, the ability to polish if necessary, and shine, which is similar to the gloss of your own enamel.

The veneering procedure is carried out in several stages: First, the dentist thoroughly cleanses the dentition from accumulated plaque, removes tartar, and cleans the interdental spaces. Next you need to remove a very thin layer of enamel - no more than half a millimeter.

According to the color scale, the required shade of the future structure is selected. The specialist etches the enamel with special substances and applies an adhesive material. Next, a plate is formed on the surface of the tooth, and the composite substance is applied layer by layer. At the end, the overlay is ground, given the required shape, and polished.

Intraoral scanner ensures optical accuracy of aligners

To make the aligners, we used an intraoral scanner, which was used to take optical impressions. That is, the camera takes many pictures, which are stitched into a 3D image in a special program. And this 3D image is sent to the laboratory, bypassing transport and time losses, bypassing shrinkage and all kinds of force majeure circumstances - hypothermia of the impression masses. Accordingly, we get a more accurate, more predictable result.

Anna

: The teeth scanning took place there for 15 minutes. And a week later, at a follow-up appointment, I was able to immediately see how my teeth would move.

Doctor Arkashov

: That is, by the time we received the result from the laboratory with the final treatment plan, we had not yet done anything to our patient. The result that we get after aligners will be appreciated by the patient. And we, as a rule, allow you to look at the result of orthodontic treatment. And many patients are satisfied with it.

Dental veneers, ceramic and composite

Beautiful dental veneers

Important: If you decide to install dental veneers, then only a doctor can help you choose the type of microprostheses on an individual basis.

• Ceramic plates for teeth are made using a mixture of porcelain and zirconium dioxide. These laminates are durable

Important: These veneers are produced in laboratory conditions. The doctor will make an impression of the tooth and remove a small top layer of enamel.

Important: During the week while the laminate is being prepared, the doctor will put a temporary prosthesis on the prepared teeth. It is not very durable, but it is able to protect the lower layers of enamel from the effects of food acids, hot and cold food.

• Composite veneers are made from a special material that is relatively permeable. Therefore, such plates can become stained when drinking tea, coffee, or red wine.

Important: Their surface becomes rough and changes color over time.

Important: Dental composite laminates will be installed in one dental visit. They do not need to be prepared in advance in a laboratory, like ceramic plates.

Advice: If you want to always have white and beautiful teeth with composite veneers, then you should regularly visit the dentist, who will correct the surface by grinding it.

What are Perfect Smile Veneers made of?

Perfect Smile Veneers on teeth are different:

• high strength;
• environmental cleanliness;
• natural appearance;
• durability.

In the production process, “Perfect Smile” uses ultra-strong and completely safe material – medical polypropylene. Thanks to the use of this material, it is possible to produce ultra-thin plates. With a minimum thickness, the lining on the teeth can protect against the negative influences of food, consumption of relatively hard foods and damage to the enamel. The material does not provoke the development of allergies and is resistant to abrasion and wear.

What's included in the Perfect Smile Veneers kit:

1. The back side of the veneers. It hides the gums. It is made on the basis of lightweight hypoallergenic silicone, which is actively used in medicine in the manufacture of various flexible elements. The silicone feels soft, does not rub, and also eliminates any discomfort while eating. Silicone not only improves the naturalness of teeth, but also improves the quality of attachment to the teeth.
2. The outer part is the teeth themselves. Made from polypropylene with the addition of nylon. Simply put, this is an overhead prosthesis. The alloy is cast in the shape of straight, white teeth. The material combines lightness, strength and resistance to aggressive external environments. The Perfect Smile Veneers removable plate was tested for resistance to acids, food coloring, low and high food temperatures, and the material performed well in all tests.

Veneers from Perfect Smile Veneers are a high-quality product that makes teeth look natural and restores a healthy smile with minimal time and financial investment. Even using onlays for the upper and lower jaws at the same time, a person feels comfortable and does not experience any discomfort; he can easily sing, eat, and communicate without removing the plate for a long time.

Ultra-durable and completely safe material is used in the production process of “Perfect Smile”

Comparison with analogues and advantages over them

How do Perfect Smile Veneers differ from the most common analogues used by dentists?

Modern dentists and prosthetists distinguish several types of veneers:

• ceramic;
• porcelain;
• composite.

Microprostheses made of porcelain are recognized as very durable and strong. However, the products have a significant drawback. We are talking, of course, about the price, sometimes exceeding 15,000 rubles. for one installed sample.

Composite structures are made of light-polymer materials used in the filling process. The price for one unit ranges from 4500-5000 rubles. Installation of such plates is carried out in several ways:

1. The location of the filling material on each dental unit.
2. Grinding of teeth, taking an impression, making a prosthesis.

The disadvantages of composite plates are their price - too high with a low durability of the products. Over time, composite linings become chipped and darken.

Of course, ceramic veneers are recognized as the highest quality veneers. Their service life can be about 10 years. The products are reliable and do not lose their whiteness over time. The joy of owning such wonderful overlays is overshadowed by their price - from 20,000 rubles. a piece.

Universal veneers Perfect Smile Veneers differ from their analogues in their pleasant quality-to-price ratio. The advantages of such overlays include:

1. Possibility of self-installation.
2. Lack of discomfort and stiffness, feeling of your own teeth in the mouth.
3. Convenience in the process of putting on and taking off the prosthesis if necessary.
4. No chips or cracks even after several years of use.

The innovative Perfect Smile Veneers are a high-quality camouflage coating for imperfect teeth. In addition, it is excellent protection for units that have sensitive enamel and react quickly to cold and hot food and drinks.

Perfect Smile Veneers instructions in Russian

The product was originally produced and distributed on the American market, so translated instructions appeared later.

The standard package includes a removable plate. Place Perfect Smile Veneers in hot water for two minutes. Polypropylene will become softer and acquire a consistency similar to plasticine. You need to keep the plate in boiling water until the white stripe on the back side becomes transparent.

Then you need to get the veneers. This can be done using a spoon.

Now you need to create a cast. The plate must be pressed firmly against the front surface of the teeth for a minute so that the material takes the shape of the jaw.

Removable teeth must completely harden outside the oral cavity. To achieve maximum effect, it is recommended to hold the product under cold water for several seconds.

If the first time it was not possible to create an ideal and convenient shape, you should immerse the polypropylene in boiling water again. After several procedures, an individual method of putting on the overlay is formed.

Universal videos about the product contain complete information about how veneers are used in real life. You can also read numerous reviews or add your own.

Veneers do not require the application of additional adhesive agents such as gel or cream. They are easily attached to dental surfaces.

In order to remove the structure, no additional effort is required.

Video on how to put on veneers

Clients rarely consult with dentists about how to fit dental veneers. Although it is almost impossible to attach the plate incorrectly, it is better to carefully read the product description before use, familiarize yourself with its characteristics and find the optimal method for attaching the veneers.

In order to avoid mistakes, it is recommended to watch how Perfect Smile Veneers are installed in the video above. The video in Russian shows in detail and demonstrates step by step how to install and wear the records.